
Material takeoff estimator
Enter the areas of the job and get a suggested material list for U.S. wood-frame construction. Every number comes from a published rate you can see and edit below — and every result is shown as a range.
Free, no sign-up. Units are U.S. units (sq ft, gal, lin ft, lb, 4×8).
1. Scopes of work
Example loaded: 400 sq ft of interior walls with drywall and paint (2 coats, roller). Change the numbers to match your job.
2. Suggested materials
| Material | Estimate | Range ±10% | Buy (rounded up) |
|---|---|---|---|
| Interior walls — drywall, finish & paint — 400 sq ft | |||
| Drywall sheets 4×8 area ÷ 32 sq ft + 10% waste | 13.8 sheets | 12.4 – 15.1 | 14 |
| Drywall screws 1/sq ft ≈ 400 screws | 0.3 boxes (5 lb) | 0.3 – 0.3 | 1 |
| Joint compound (all-purpose) 10 gal / 1,000 sq ft | 0.9 boxes (4.5 gal) | 0.8 – 1.0 | 1 |
| Joint tape 370 ft / 1,000 sq ft | 0.3 rolls (500 ft) | 0.3 – 0.3 | 1 |
| Primer 1 coat @ 300 sq ft/gal · roller/brush | 1.3 gallons | 1.2 – 1.5 | 2 |
| Paint (wall) 2 coat(s) @ 350 sq ft/gal · roller/brush | 2.3 gallons | 2.1 – 2.5 | 3 |
| ⚠️ Paint varies with the method (roller vs. sprayer), surface texture, color change and the product — check the label. Not included: corner bead (count outside corners), sanding, and openings deducted. Moisture-resistant board for baths. | |||
Opens a new quote with these materials as line items (quantity = the “Buy” column). You add the prices.
This is an estimate, not an order. Quantities are calculated from typical published coverage rates and can be off by about ±10% or more depending on layout, openings, product, application method (for example roller vs. sprayer for paint) and crew. Always confirm with your supplier and the product label, and check your local building code.
Coverage rates used (editable) and where they come from
Change any rate to match the product you buy. Results update instantly. These defaults are starting points — verify them against current manufacturer data sheets before using this commercially.
How it's calculated
How much paint do I need per square foot?
The calculator assumes one gallon covers 350 sq ft per coat (typical labels say 350–400 — check your product). Primer is figured at 300 sq ft per gallon. Spraying with an airless sprayer adds 30% extra paint (typically 20–35% — depends on tip, pressure, wind and operator). Example: 400 sq ft of walls with primer and 2 coats by roller comes to about 1.3 gallons of primer and 2.3 gallons of paint; buy 2 and 3.
How many sheets of drywall do I need?
Divide the area by the size of the sheet (32 sq ft for a 4×8, 48 sq ft for a 4×12) and add waste (10% by default; you can change it). Example: 400 sq ft of walls is 13.8 sheets of 4×8 including waste; buy 14.
What about joint compound, tape and screws?
Joint compound: 10 gal per 1,000 sq ft (a box holds 4.5 gal). Joint tape: 370 ft per 1,000 sq ft (a roll is 500 ft). Screws: 1 per sq ft on walls and 1.33 on ceilings, at 1,400 per 5 lb box. You can see and change every rate, with its source, in the table above.
Why a ±10% range?
Because the quantities come from typical published coverage rates, and on a real job they change with the layout, openings, the product, the application method (for example roller vs. sprayer for paint) and the crew. The range shows the estimate minus and plus 10% (you can change it), and the “Buy” column rounds the estimate up. It is an estimate, not an order: confirm it with your supplier and the product label.
Turn this into a quote — try Cuadrilla free for 15 days
Put these materials in a quote with your prices, send it to your customer in English or Spanish, and turn it into an invoice.